Skip to main content

Participate in a polling session

  • ​Whether you use an iClicker2 remote or the iClicker REEF App, polling is as easy as A, B, C.
  • Review some of the key differences in the chart below:
iClicker2 Remote
iClicker REEF App
  1. Press the power button to turn on the remote.
  2. You’ll see your remote frequency set to AA by default.
  3. To change your remote frequency follow the steps outlined on the iClicker frequency support page.
  4. When your instructor starts polling you will select your response using the A, B, C, D, or E buttons.
  5. You can change your answer multiple time until polling has stopped.

a screenshot of the iClicker2 Remote
  1. Open the iClicker REEF App on your device.
  2. Find your class and click/tap to open.
  3. Once your instructor starts a session, you will see: “A POLL IS IN PROGESS”
  4. Click/tap the Join button
  5. a screenshot of the Join button  
  6. You will see: "YOU’RE CONNECTED
  7. When polling starts, your device will prompt you to “SELECT AN ANSWER
  8. Select your response using the A, B, C, D, or E buttons.
    • You can change your answer multiple time until polling has stopped.

a screenshot of a cell phone showing an active Poll

If you have any questions or comments regarding the steps outlined in this document, please contact UHD TLS Training Services by calling (713) 221-8200, or by sending an email to ttlctraining@uhd.edu.

Last updated 12/10/2020 5:09 PM